24
EN
Child lock
Press keys (2) and (3) simultaneously in heating mode. The child lock is now active
and the system is locked. No settings can be made. After 5 seconds, the ambient
temperature appears in the display.
To unlock, keep keys (2) and (3) pressed for 3 seconds.
Activation of the display
When the instrument is in operation, the display is off. Pressing the control panel turns the
display on.
ECO function (night mode)
In heating mode, press and hold keys (1) and (2) for 3 seconds (or the ECO key on the
remote control) to activate the ECO function. In this operating mode, only the displays
(5), (6), (7) or (8) are shown, depending on the previously selected setting.
Display change of temperature in degrees Celsius or Fahrenheit.
Press and hold the Settings button (1) and the Up arrow button (2) simultaneously for 10
seconds.
Open window detection function
If the temperature drops by 3 °C or more within 2 minutes, the open window detection
function is triggered. The unit stops heating and the display (9) flashes. Press the key (4)
to switch the unit off. If you now switch the device back on, the open window detection
function is deactivated.
Resetting WLAN
Press and hold the key (1) for 3 seconds in heating mode. The WLAN settings are reset
and the corresponding indicator flashes quickly (twice per second).
Switching off
Press and hold the on/off key (4). The operating lamp lights up.
Summary of Contents for 10034390
