Klarstein 10037979, User Manual

19

Setting the temperature

Press“ 1 „to set the temperature,“ 10 „and“ 9 „will flash , then press“ 2 „or“ 3 „arrow buttons to add 1“C or 
reduce 1·c. The maximum setting temperature is 45“C, while the minimum one is 5“C. Keeping pressing“ 2 
„or“ 3 „to add or reduce 1 ·c in 0. 5 S. The last setting temperature is the valid one. If no operation within 
3S, the system will return the running state,“ 9 „indicator will not flesh while room temperature is displayed.

Switching the display between degrees  Fahrenheit and Celsius

Press the keys SET and UP (the two keys on the left) simultaneously for about 10 seconds.

Setting timer

Press“ 1 „once again to set timer, setting time is displayed while timer indicator flesh (the timer unite is hour). 
Pressing“ 2 „or“ 3 „to add or reduce 1 hour, the timer range is 0-2 4 hour.
Keeping pressing“ 2 „or“ 3 „to add or reduce 1 hour in 0.5 second. The factory-set timer is 0 hour. With indi-
cator lighting, the system starts to time according to last setting time if there is no operation for 5 seconds. 
Each time“ 2 „or“ 3 „is pressed to set timer, system restarts to time by new time, or it does by original one till 
timing is over, then turns off and stops working. The unit is turned off without buzz hint when timing is over.

Turn off

Keeping pressing“ 4 „in any status to turn off the unit and power indicator keep light.

Children safety lock function

Under the working mode, press both“ 2 „ or „ 3 „at the same time for 3 seconds to lock the system. Then a 
square“[J“is displayed. Methods to unlock:
1) Shut off the electric machine. 2) Press both“ 5“ or „ 6 „for 3 seconds.

Power selected

When did not enter any models, pressing” 2 “to select the output power, the heater will work the full rated 
output while” 7 “is displayed. Pressing” 3 “to switch to” 6 “heating mode. Or through high/low on the remote 
control switch button” 12 “to choose the output power.

Wake-up function

The heater shows only area temperature on screen when in ready mode. You just touch (press) the screen 
below the numbers, then it wakes up and you could control its functions.

The sound hint of key-press

Press any button there have buzzer ringing sound.

Safety feature

The unit is equipped with a high limit switch, the heater will automatically shut off if it is in an over-heating 
condition. The heater will automatically turn back on when it has cooled down.