19
EN
Operation
1. If filling water by manual (10029294), take out of the ice basket,then add
water to the tank directly,please make sure the water is not over the MAX line. If
filling water automatically (10029295),connect the external water pipe at back of
unit with the water tape as follows.
2. Plug in.
3. Select desired ice cube size by pressing “SELECT”. Note: Please select the (S) when
ambient temperature is below 15 °C.
4. Press “START” button to turn unit on. The ice maker begins to work. Note: For the first
three cycles,the ice may be small and irregular in size,and it would last for longer
time,maybe even around 60 minutes.
5. If indicator ‚ICEFULL‘ is in red with noise ‚DI DI‘,please take out the ice with the
scoop.
6. Press ‚STOP‘ button to stop the machine.
7. Remove the drain plug to drain remaining water from the water reservoir. Screw the
drain plug back in place after the water has been drained.
