WE.3359
Version
1.b
1/99
Auf
dem
Knapp
46
Tel.:
++49
(0)2191/907-0
D-42855
Remscheid
Fax:
++49
(0)2191/907-141
________________________________________________________________________________________________________________
Instruction Manual
Cutting Tool K201/1
1. General
Remarks
Before starting to use the tool please read the instruction manual carefully.
2. Technical
Data
- Weight:
2 kg
- Length:
600 mm
- max. cutting diameter: 26 mm max. (e.g. 4 x 35 mm² NYY)
- Temperature range:
-20°C to +70°C
- Insulation:
acc to EN 60900, IEC 900
- Application:
up to 1.000 V AC
3. Determined
Use
This cutting tool is for cutting cables or conductors with nominal voltages up to 1000 V
AC and 1500 V DC. All applicable standards for working on or near live lines must be
complied in respect of necessary precaution and safety measurements. (e.g. EN 50110
part 1)
4.
Explanation of the application range
Our mechanical hand-guided cutting tool type K201/1 is suitable for cutting live earth,
plastic and rubber cables from copper and aluminium.
Attention
Do not cut steel or steel strands.
5. Maintenance
The cutting tool has to be cleaned thoroughly after each use and the bolt joints have to
be oiled regularly.
