Instruction
manual
SDG
85
page
6
___________________________________________________________________________
Instruction Manual
for the hydraulic cutting tool Type SDG 85, Serial-No. ...........................
1. Introduction
Before starting to use the pump please read the instruction manual carefully.
Use this tool only for its determined use and manufacturer approved operations.
Cutting of cables with this tool must only be performed by specially trained personnel.
The minimum age is 16 years.
This instruction manual must remain with the unit for the whole time.
The operator must
- guarantee the availability of the instruction manual for the user and
- make sure that the user has read and understood the instruction manual.
2. Labels
The labels fixed on the housing of the pump designate the type specification, assembly year,
name of the manufacturer and/or the company logo. The serial number is on the hydraulic
cylinder.
3. Warranty
If correct operation is guaranteed and regular service is provided our warranty is 1 year
from the time of delivery.
4. Description of the hydraulic cutting tool
The hydraulic cutting tool SDG 85 consists of the following components:
picture 1
latch
cutting
blades
cutting
head
coupling
Pos.-No. 4
Pos.-No. 1
Pos.-No. 3
Pos.-No. 4
The max. operating pressure is marked on the decal of the cutting head.
