Congratulations
:
on purchasing the Kldguitar
AT 100.
The AT-100 is KLD
Guitar's high wattage attenuator a dream device that provides full control of the
output level from your amplifier to your speakers without squashing any of the
dynamic feel and tone you've worked so hard to perfect. This totally roadworthy
box connects between your amplifier and either one or two cabinets.
Designed for use strictly with vacuum tube guitar amplifiers, each version of the
AT-100 is optimized for specific impedance. These inductive loads are
frequency-compensated, which means you get the best possible sound for that
impedance speaker and amplifier combination. Plus the AT-100 is no simple
power attenuator. It offers many capabilities that make it a great addition to any
tone-hungry player's arsenal.
The AT -100 is also offering a compensate switch for tailoring your sound. The
Bright switch gives you 2 different high-frequency levels so you can compensate
for an overly bright or dull speaker cabinet.
Adjustable Line Out
AT -100 also feature a Line Out, which is adjustable by its own volume control,
giving it a wide range of applications. At higher settings, it can provide enough
signals to drive the input of a separate power amp for slaving. The middle range
of settings is useful for most rack mount effects. And turned most of the way
down, the AT-100's Line Out will drive the instrument input of another guitar
amplifier for extra power and volume.
There are three kinds of input impedance of attenuator: 4, 8, 16ohm. please
select right attenuator according to your output impedance of amp and input
impedance of cabinet
。
CONTROLS:
·Master Output Control attenuates the output level of a fully cranked 100-Watt
amplifier all the way down to total silence (used with Input Attenuation Switch
set at -12dB)
·Input Attenuation Switch 3-position (0.0dB, -6dB, -12dB) attenuation for
speaker input
·Compensate Switch 3-position (Off, Bright 1, Bright 2) "brightness" circuit to
compensate for an overly bright or dull speaker cabinet
·Speaker On-Off Switch for headphone-only use or quiet recording using Line
Out jack
·JACK (1/4" phone):
·Line Out
·Input (max. 150 Watts)
·Output
·Head Phones (requires -12dB attenuation)
Input impedances: 4 ohm,8 ohm and 16 ohm
Power Handling: Up to 150 Watts
DIMENSIONS:30cm x 20cm x 20cm (11.8" x 7.8" x 7.8")
WEIGHT: 3.5kg (7.72 lbs)
