1 IN PUT
Connect the input jack to your instrument or Send jack of amp which has FX
loop. The circuit is automatically turned on when a plug is inserted.
2 OUT(DRY-OUT):
The "Out" jack normally carries a dry and delayed signal. However, if the "Dry
Out" jack is used, it outputs only the dry signal, while the "Out" jack only
outputs the delayed signal. In this way, it is possible to achieve stereo effects.
3 BLEND:
Level control for delay signal. At full CCW position, only the dry signal is at the
output. As the control is turned CW the delay signal increases. At full CW
position, the dry and delay signals are at equal levels, (1:1).
4 TIME:
Turning CW (clockwise) increases delay time
.
5 REPEAT:
The amount of delay signal feedback controls. On slap-back delays REPEAT
determines the number of repeats. On shorter delays REPEAT varies the
coloration of the sound. Adjustable from no feedback at full CCW(counter
clockwise) to oscillation or infinite repeat at full CW.
7 LED of ON/OFF:
Indicator comes on when effect is on. If it is dim or does not light, replace the
battery.
8 EXT D.C.:
When using external D.C. supply, internal batteries are switched off.
For more information about our products, please look at our website
http://www.kldguitar.com