7
DRAWER ADJUSTMENT AND REMOVAL
A-
up/down
adjustment
B-
left/right
adjustment
C-
release the
drawer box
from the
glides
D-
remove the
drawer front
ADJUSTMENT:
A) Turn the metal adjustment screw to adjust the
drawer front up and down.
B) Adjusting your drawer fronts to the left and right
can be a little tricky. To make adjustments, you
will adjust the white adjustment screw inward
and outward of your drawer kit by using a
Phillips screwdriver. Protrude both adjustment
screws to the right to force the drawer front
to move to the left. Protrude both adjustment
screws to the left to force the drawer front to
move to the right.
REMOVAL:
C) To release the drawer box from the drawer
glides, begin by placing your hands under the
center of the drawer front. Be careful not to
place hands under the drawer glides. From the
closed position, use gentle force to extend the
drawer completely out and then lift upwards in
one fluid motion.
D) To remove the drawer front, use a Phillips
screwdriver into the hollowed-out location
(looks like a + symbol) and rotate towards the
back of the drawer box until the bracket is
released. Repeat on both left and right sides
of the drawer. Note: If the white screw on the
mounting bracket has been adjusted and is
protruding out, you may need to un-adjust the
screw to remove or re-install the drawer front.
