STEP 1:
• Press cam lock (H1) into shelf (B). A rubber mallet may be used for assistance.
• Install cam lock screws (H2) into the tall cabinet side wall using a Phillips head screwdriver. Screws should line
up with the cam lock.
Note: Place cam lock screw in the center of the upright for accurate assembly. Once unit is
assembled completely, this shelf can be moved to accommodate the configuration. Use 32nd hole for 80” height
and 36 hole for 90” height.
• Press shelf onto cam lock screws and secure into place with a quarter turn using a Phillips head screwdriver
Note: Raw end of shelf faces upward.
Finish side faces downward towards floor.
STEP 2:
• Place glue (H6) into pre-drilled dowel holes of the cabinet side wall (sold separately).
• Insert wooden dowels (H3) into glued holes.
Note: Roughly half the dowel should fit into the hole.
• Apply glue (H6) onto exposed end of inserted wooden dowels (H6).
• Connect bottom piece (A) to dowels on cabinet side wall. A rubber mallet may be used to ensure a tight fit.
• Secure bottom piece (A) into place using 3 confirmat screws (H4).
(B)
(B)
(A)
(A)
