STEP 3:
• Repeat Step 2 for (C) top piece.
• Place glue (H6) into pre-drilled dowel holes of the cabinet side wall (sold separately).
• Insert wooden dowels (H3) into glued holes.
Note: Roughly half the dowel should fit into hole.
• Apply glue (H6) onto exposed end of inserted wooden dowels (H6).
• Connect top piece (C) to dowels on cabinet side wall. A rubber mallet may be used to ensure a tight fit.
• Secure top piece (C) into place using 3 confirmat screws (H4).
STEP 4:
• Place glue (H6) into pre-drilled dowel holes of top piece (C) and bottom piece (A).
• Insert wooden dowels (H3) into glued holes.
Note: Roughly half the dowel should fit into the hole.
• Apply glue (H6) onto exposed end of inserted wooden dowels (H6).
• Connect the second side wall (sold separately) to dowels on top piece (C) and bottom piece (A). A rubber mallet
may be used to ensure a tight fit.
• Secure the second side wall into place using 3 confirmat screws (H4) on each end.
• Repeat step 1 to the second side wall to secure cam lock shelf (B) into place.
Note: Raw end of shelf faces upward.
Finish side faces downward towards floor.
(B)
(A)
(C)
(C)
(A)
(C)
(B)
Note: Before moving onto the next step, place a
spacer under the cabinet so it will be easier to lift
off of the floor.
