Kleenmaid TO901X, Instructions For Use Manual

24

SETTING THE SELF-CLEAN MODE

To Set the Self-Clean Mode

1. Press UPPER/LOWER key to select the

cavity to be cleaned, if the oven is a double.

2. Rotate both knobs into the clean position.

3. CLEAN & TIME appear.

4. The number of cleaning hours is displayed

automatically, standard cleaning time is 3
hours.

5. At the end of the programmed cleaning time, 

the oven will automatically turn off. 

6. To stop the cleaning mode at any moment,

move one of the two knobs from the cleaning
position.

Do not attempt to open the door while the door is 
locked.
mechanism stops. Once the lock symbol stops 
flashing & is displayed the door cannot be opened.

The lock symbol will flash until the locking

Check that the door has been locked and will
not open before starting the Self-Clean mode.

If door does not lock, rotate the cooking mode
knob into the OFF position and do not start self-
clean; phone for service.
If the door is in the open position when this mode
is selected, the lock symbol will flash until the
door is closed. The latch doesn’t move. 

To Change the Cleaning Time

1. To change the setting from 3 hours, select

either 2 hours for light soil or 4 hours for
heavy soil immediately before starting. 

2. To change the hours, touch the COOK key.
3. The number of hours for cleaning will flash.
4. Use [+] or [-] buttons  to change the

number of hours. 

5. To change the minutes, touch the COOK 

TIME key. 

6. The number of minutes for cleaning will flash.
7. Use [+] or [-]  buttons to change the number 

of minutes. Hold the key to change by 10 minutes.

Press COOK TIME or wait a few seconds to 
confirm the new value. 

To Delay the Start of Cleaning 

1. Follow steps 1 through 7 above. 
2. Touch the STOP key and the hour to stop will

begin flashing.

3. Use the [+] or [-] buttons to change the stio hour. 
4. To change the minutes, touch the STOP

TIME key. 

5. The minutes to stop cleaning will flash.
6. Use [+] / [-] buttons to change the minutes.

Hold the key to change by 10 minutes.

7. Press STOP or wait a few seconds to

confirm the new value. 

8. Oven door will lock and display shows

DELAY.

9. When the delay time ends, cleaning will start.
10. At the end of the programmed cleaning time, 

the oven will automatically turn off. 

11. END will appear on the display, CLEAN & 

TIME will flash until any time key is touched 
or the knob is moved to the OFF position. 

TO CHECK CLEAN TIME OR STOP TIME 

during a del
or STOP buttons.

ayed clean, simply press COOK