ENGLISH
Instruction
Manual
ENGLISH
MM5000
• TRUE RMS
• AUTO / MANUAL
RANGE
• AUTO HOLD
• MAX / MIN
• BAR GRAPH
• BACKLIT DISPLAY
• 3-3/4 DIGIT
4000 COUNT LCD
• LEAD STORAGE
4007036
ELECTRICAL SPECIfICATIONS
DC Voltage Measurement
Range
Resolution
Accuracy
400.0mV
0.1mV
± (0.3% + 5 digits)
4V ~ 400V
1mV ~ 0.1V
1000V
1V
± (0.8% + 10 digits)
Overload Protection:
1000V
Input Impedance (Nominal)
: >10M
Ω
, <100pF
Input Impedance (LOW Z)
: >3k
Ω
, <200pF, up to 600V RMS
AC Voltage Measurement
Range
Resolution
Accuracy
40Hz ~ 400Hz
Accuracy
400Hz ~ 2kHz
400mV
0.1mV
± (0.75% + 5 digits)
± (2.5% +10 digits)
4V ~ 400V
1mV ~ 0.1V
± (2.0% +8 digits)
1000V
1V
± (0.75% + 8 digits)
± (2.0% +8 digits)*
Overload Protection:
1000V RMS
Input Impedance (Nominal):
>10M
Ω
, <100pF
Input Impedance (LOW Z)
: >3k
Ω
, <200pF, up to 600V RMS
frequency Range:
40 to 2kHz
Response:
True RMS
*Accuracy for 400Hz ~ 1kHz range only.
DC Current Measurement
Range
Resolution
Accuracy
400.0µA
0.1µA
± (1.0% + 5 digits)
2000µA
1µA
Overload Protection:
600V RMS
AC Current Measurement
Range
Resolution
Accuracy
400.0µA
0.1µA
± (1.5% + 5 digits)
2000µA
1µA
Overload Protection:
600V RMS
frequency:
40Hz to 2kHz
Response:
True RMS
Resistance Measurement
Range
Resolution
Accuracy
400
Ω
˜ 4M
Ω
0.1
Ω
˜ 1k
Ω
± (1.0% + 5 digits)
40M
Ω
0.01M
Ω
± (1.5% + 10 digits)
Overload Protection:
600V RMS
Diode Test
Overload Protection
Range
Test Current
Open Circuit Voltage
600V RMS
4.0V DC
Appx. 0.25mA
< 1.8V DC (typ.)
Continuity Test
Overload Protection
Open Circuit Voltage
Threshold (Appx.)
600V RMS
Appx. 0.44V
Appx. < 40
Ω
Specifications subject to change.
WARRANTY
www.kleintools.com/warranty
CLEANING
Turn instrument off and disconnect test leads. Clean the instrument by using a
damp cloth. Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period
of time. Do not expose to high temperatures or humidity. After a period of
storage in extreme conditions exceeding the limits mentioned in the General
Specifications section, allow the instrument to return to normal operating
conditions before using it.
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations.
Prior to disposal of this product, please contact Klein Tools
for proper disposal options.
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
www.kleintools.com
customerservice@kleintools.com
Rev 04/14 B
139749
7.
Low Impedance (LOW Z): < 600V
DO NOT use (LOW Z) mode at voltages greater than 600V.
• Press SELECT to choose AC or DC Voltage.
• Use Low Impedance (LOW Z) mode to reduce ghost voltages.
• See AC/DC Voltage instructions.
6.
Continuity
Features:
HOLD
MAX/MIN
• Display shows resistance.
• Buzzer sounds if less than 40
Ω
.
5.
Diode Test
Features:
HOLD
MAX/MIN
Display shows:
• Forward voltage drop if forward biased.
• “O.L” if reverse biased.
4.
AC/DC Current (small): < 2000µA
Features:
HOLD
AUTO HOLD
RANGE
MAX/MIN
DO NOT attempt to measure more than 400mA.
• Attach RED lead to “µA” input.
• Break circuit to be measured.
• Attach RED lead to "µA" input, BLACK lead to COM.
• Connect RED lead to one side of break and BLACK lead to the
other (meter in series).
• Select AC or DC current source.
Dwg Name:
MM5000-139749ART
Dwg No:
139749
ECO No:
016671
Pkg Dwg Ref:
1650
Rev:
B
Color Reference:
CEN-PACK-003-A
MM5000-139749-Instructions.indd 1-4
5/5/14 10:14 AM
