GMTRK4
Installation and Operation Manual
PG 28/42
REV: BETA (4/4/2020)
9.3.
Install Air Tank
9.3.1.
Take pre-assembled Air Tank with Air Fittings and position over two (2) Square Neck Bolts protruding from
Air Tank Bracket. Use vice grips or a hand clamp to hold Tank to Bracket to facilitate installing hardware.
NOTE:
Insert Air Tank between rear leaf spring shackle and bed side at an angle, using a twisting
motion and rotating it into place over Bolts. Clearance is tight during insertion process; use care
not to knock out Bolts previously installed into Bracket.
Figure 19
–
Installing Air Tank onto Air Tank Bracket (2020 Silverado Shown)
Bracket
2X Tank Bolts
FRONT
Leaf Spring
