RAMHD-230/734KIT
Installation and Operation Manual
Go to Table of Contents
PG 10/41
REV: BETA (2/19/2018)
5.
List of Tools and Supplies
5.1.
Standard Tool List (Required)
1.
Basic mechanic’s 3/8” drive socket sets with extensions
a.
Inch Size Sockets (1/4” –
1” Hex)
b.
Metric Size Sockets (6mm
–
20mm Hex)
2.
Basic mechanic’s combination wrenches (box/open
-end)
a.
Inch Size Wrenches (1/4” –
1” Hex)
b.
Metric Size Wrenches (6mm
–
20mm Hex)
3.
Basic mechanic’s screwdriver set (Philips, Flat Head)
4.
Diagonal Cutter/Wire Cutter Pliers
5.
Wire Strippers
6.
Wire Terminal Crimpers
7.
Slip-Joint Pliers
8.
Utility Knife, or Utility Razor blade
5.2.
Special Tool List (Recommended)
1.
10-100 ft.-lb. torque wrench
2.
50-150 in.-lb. torque wrench
3.
Multi-Meter for 12V DC electrical systems, or equivalent
4.
12V DC Test Light, or equivalent
5.3.
Shop Consumables List (Recommended)
1.
Quality Electrical tape
2.
Di-electric grease for electrical connections
3.
Heat Shrink tubing for electrical connections
4.
Sand Paper, or Wire Brushes for installing ground wires
5.
Extra plastic zip ties > 6” long
6.
Extra NPT sealant (i.e., Kleinn Air Horn Juice, Teflon tape, etc.)
7.
Touch-up paint for frame/chassis
8.
Typical cleanup supplies
