RAMHD-230/734KIT
Installation and Operation Manual
Go to Table of Contents
PG 23/41
REV: BETA (2/19/2018)
8.
On-Vehicle Mechanical Assembly Steps
Complete following steps on vehicle.
Raise vehicle off ground using appropriate vehicle lift, ramps, or jack stands.
DANGER
: Installation requires being underneath vehicle and applying forces to vehicle chassis. Follow all
recommended safety precautions for raisin
g vehicle; consult vehicle owner’s manual.
8.1
Large-Medium Horn Assembly Installation
1.
Attach Large-Medium Horn bracket assembly onto vehicle chassis, per below illustration.
a.
Use RAMHD Hardware kit.
i.
Finger tighten fasteners only, but ensure bracket is sitting entirely flush on chassis.
b.
Install Medium trumpet into open driver and tighten firmly.
Crew Cab and Mega Cab Orientation
