RAMHD-230/734KIT
Installation and Operation Manual
Go to Table of Contents
PG 24/41
REV: BETA (2/19/2018)
Crew Cab and Mega Cab Orientation (734KIT Shown)
2.
Position bracket properly and tighten fasteners, per below illustration.
a.
Move bracket up-down, and fore-aft, as necessary to ensure adequate clearance between all
trumpets and underbody
i.
Large Horn Trumpet must have minimum 1/4” (i.e., thickness of Bic Pen) clearance
between underbody floor brace.
ii.
Horns can also be repositioned on bracket slots.
b.
Hold bracket in correct position and tighten mounting fasteners firmly
c.
Tighten horn mounting fasteners to bracket firmly
FRONT
