Align the display box with the holes on
the base. Screw in the bolts to secure
the two parts.
Using the screwdriver provided with the
pallet truck, tighten the screws on either
side of the plugs.
Turn on to test the scale.
Connect the two plugs.
Gently push and slide the battery cover to open it. To
connect the battery, plug the connector into the socket
to the right of the battery pack.
3.
5.
7.
4.
6.
OPERATING PALLET TRUCK
To raise the forks, place handle lever in UP position (bottom part of the handle slot).
SEE FIGURE 2.
DOWN
NEUTRAL
UP
FIGURE 2.
4
