6.3 Display/User interface
The
Display
(with user interface) is your gate to the electric propulsion system
(Image 1)
With the display you start and control the electric system.
You can start the system with or without inserting the E-KEY.
When the key pairing function is enabled, the bicycle has its own individually
programmed display. When enabling the key matching function in setting motor lock,
only the same ID of E-KEY will work with the bike. It is not possible to activate your
Pedelec with the E-KEY of another bike. There are two same E-KEY on a bike after
manufacturing.
Every press of a button will be confirmed with a short acoustic signal.
As soon as the E-KEY is inserted into its display, the system starts.
With the E-KEY already in its display while the system is off, you have two ways to
start it:
1. Push the power button
the system will make a check for the first 3 seconds - now the system is ready
or
2. You start pedaling the bike and trigger the automatic start sequence.
A system
check is started for the first three
seconds, after which the system supports you.
14
Propulsion system of Klever Mobility
Image 1
