Propulsion system of Klever Mobility
31
6.4.3 Disassembly and assembly of the battery
Removing the battery
The battery is automatically saved with the battery lock and
thereby protected from theft. Using the provided key you can
lock and unlock both.
To disassemble the battery, first turn off the system using the power
button on the Display. Turn the key in the battery lock clockwise
up to the stop and pull out at the same time on the handle the
battery pack diagonally backwards, against the direction of travel,
completely out of the bracket on the frame. (Image 28a)
Now you can charge the battery separately or store it safely for
a longer ride break.
We recommend you cover the battery connector by the rubber seal
to prevent from water and humidity. (Image 28b)
Mounting the battery
Insert the battery carefully into the guide rail, while the groove
of the battery casing must be careful inserted into the guide rail
on the bicycle frame, and let it gently down glide until you heard
the lock engages and the electronic contacts are connected.
(Image 28b+29)
The key does not leave in the lock, the lock will automatically
snap in and the battery is now locked, the system is ready for
operation and the battery protected from being stolen.
Image 28a
Image 28b
Image 28c
Image 29
