If it’s not possible to adjust the headset, this may have many
reasons. In this case you should definitely contact an authorized
dealer.
The Bicycle
Caution: Finally, check the tightness of the stem. A loose stem is
dangerous and can lead to an accident.
You can check smooth running by lifting the front of your bike and letting the
handlebar swing to the left and right. The front wheel has to be able to move
freely and without stopping. If you feel slight stops in the movement, the
bearing is worn and the headset has to be replaced. This has to be done
quickly by a dealer.
36
Feel light grids, the tax rate are worn out and need replacing.
The let most immediately by the dealer perform.
7.3 Suspension fork
Your Pedelec is equipped with a high-quality suspension fork which
increases your comfort and the safe handling of the bike. The fork
is set at the factory and ready to run.
A lock out lever that sits on the right side of the fork crown, you can
lock your suspension fork (image 40). This locking mechanism
should only be used on smooth, flat roads. On bad roads, the spring
should function and the lock mechanism should always be open.
To keep your fork for a long time working, it should be regularly
maintained. Some basic maintenance tips you should heed. Clean
the smooth surface of the stand pipe of the fork after every ride
with a clean cloth and some water. Afterwards spray the tubes with
some lubricating spray or some hydraulic oil, so it can smooth
deflecting and the bearings remain always lubricated.
Image 40
Caution: You should never clean the fork either with a
steam cleaner or with harsh detergents. Always follow
the maintenance and care instructions on the
manufacturer's instructions supplied with the bike.
