51
Technical Data
The torque indications always refer to the upper limit of the screws
resilience.
You should always adjust the torque key to a little more than 50% of
the value stated by the manufacturer and tighten the screw. Check the
firm fit of the connection afterwards.
If the clamping connection is not strong enough, increase the value
gradually in steps of 0,5 Nm.
If necessary, adjust the maximal value (never exceed it) and loosen the
screw by half a revolution before finally tightening it.
Tools:
Toolsl
Combination Wrenches
Sockets and Bits
Torque Wrench
Torx
Tire Lever
The gross vehicle weight of the bike:
Rider + luggage = 120 kg
Rider + b luggage = 145 kg
Tires:
Size: 24 x 2.15, 55-507
The recommended air pressure: 2.0~4.0 bar;
Circumference approximately 1900 mm.
The exact circumference of the wheel depends on the
air pressure and the weight load of the bike.
