55
Wear
14. Wear
Your Speed Pedelec as technical product consists of many components,
which are subject to normal wear due to their function. Therefore, all the
following components should be regularly checked and if necessary
replaced immediately:
1.
Brake Discs and pads
are claimed during each braking operation and worn
appropriately. Therefore, they must be periodically reviewed and if
necessary, be replaced immediately.
2.
Tires and tubes
are subject to a function-related wear and should be
checked regularly. Regularly check the air pressure and tread depth. The air
pressure should always be at the manufacturer's recommended operating
pressure, which is printed on the tire sidewall.
Is the profile of the tire no longer deep enough or the tire has cracked
sidewalls, it should be replaced immediately.
3. Rims and spokes
are stressed at every braking or driving over an obstacle.
Regularly check the concentricity of the rim and the spoke tension. If the
wheel has a radial or axial offset, it should be readjusted immediately. In the
event of breakage of a spoke, the broken spoke should be immediately
replaced and the wheel has to be centered.
4. Chain, sprocket, chain wheels and derailleur rolls
wear out normally at
every time. Regular cleaning and lubrication of these components can be
extended considerably their service life. They should, however, if they are
worn be replaced immediately.
5. Shifting and brake cables
must be maintained regularly and replaced if
necessary. Especially the bike is often parked outdoor and exposed to the
weather.
6. Hydraulic oils and lubricants
change over time and lose their effectiveness.
Therefore, all lubrication points are regularly cleaned and re-greased to
minimize the wear.
7. he painting
requires regular care. Check regularly all the paintwork for
damage and rectify this immediately. The points at which cables can
rubbing the painting, you should be protect them with a little clear,
transparent film
