5
Heating Mode
Auto Mode
Cooling
Mode
Range
8
-
37
℃
Range 15 - 40
℃
Range 8 - 40
℃
6. How to check parameter settings and measured values of current status
Regardless whether the heat pump is "running" or in "standby" press MODE for 5 sec.
The display will start to blink (both digits)
The first digit indicates the "parameter"
The second digit(s) indicate the value of the "parameter"
This "reading mode" will be deactivated if you do not press a button for 10 sec.
By pressing ▲ or ▼ you will see parameters from 0 to F (one by one)
Make a note of each parameter
(for your records.)
Wait 10 sec. and this function is deactivated (you are back to normal)
