4
Roof Fans
SMART-EC-6200 25.01.2019
2.
Application
SMART-EC-6200 roof fans
are meant for general ventilation of buildings. They are
designed for
conveying the dry dust of maximum tempe40
C and
dustiness not exceeding 0,3 g/m³
The devices cannot be applied in atmosphere containing viscous, aggressive contaminants, or
in atmosphere that create explosion hazard.
3.
Reservations of Producer
A.
Manufacturer is not liable for any consequences following from the operational use that is
in contradiction to the purpose of application.
B.
Do
not install any
additional elements
not belonging to the normal device
structure or acces-
sory set.
C.
Any structural changes or modifications on the appliance
on one’s own are not permitted.
D.
Protect the device housing from mechanical damage.
E.
Before the installing, check the load carrying capacity of the wall / building structure in pla-
ces where the roof fan shall be installed. Unsure mounting could cause damage of the de-
vice, risk to personnel / people in the vicinity.
F. SMART-EC-6200 fan
is not appropriate for conveying the air polluted with a mixture
of flammable
substances in a form
of gas, vapour, mist or dust, that could create the
explosive atmosphere
.
G.
Don’t use the fan for conveying the air containing viscous
compounds that would de-
posit within the appliance, especially at the impeller.
H. Neither apply the fans for conveying the air containing aggressive compounds that
would have destructive effect on the device.
I.
In the course of operational use,
the maximum impeller rotations
should not
exceed their no-
minal rotations.
J.
Manufacturer
is not responsible
for any wounds or body lacerations,
experienced during the
improper operational use of the appliance.
4.
Technical Data
Table No.1
Type
Supply
voltage
Rotations
Motor
rate
Maximum
volume flow
Maximum
vacuum
Weight
[V/Hz]
[1/min]
[W]
[m³/h]
[Pa]
[kg]
SMART-EC-6200 3x400/50
1450
1000
6450
540
47,6
Ingress protection IP44
