3
07.02.2017
Explosion proof stationary fan
WPA-P-N/Ex
1.
Introductory Remarks
The purpose of the present User’s Manual is to supply User with directions within
the range of application, installation, start-up and the operational use of the
WPA-P-N/Ex explosion proof portable fans
.
Installing, start up and operational use are exclusively admissible after getting
acquainted with the contents of the User’s Manual
.
With regard to continuity of work carried on improvement of our products, we
reserve for ourselves the revision possibility of the draft and technological
changes improving their functional features and safety.
The construction of the
WPA-P-N/Ex explosion proof portable fans
meets the require-ments
of the current state of technology and the safety and health assurances included in:
2006/42/EC
Machinery Directive
of the European Parliament and of the Council
of May 17
th
, 2006 on machinery
– amending the 95/16/EC (recast)
/
Journal of Laws EC L157 of 09.06.2006, page 24
/
2014/35/EC Directive
of the European Parliament and of the Council of February 26
th
, 2014
on the harmonisation of the laws of Member States relating to the making available on the
market of electrical equipment designed within certain voltage limits
/
Journal of Laws EC L96 of 29.03.2014
/
2014/34/EC ATEX Directive
of the European Parliament and of the Council of February 26
th
,
2014 on the harmonisation of the laws of Member States relating to equipment and
protective systems intended for use in potentially explosive atmospheres.
/
Journal of Laws EC L96 of 29.03.2014
/
The device has been constructed and produced on the basis of following harmonized standards:
PN-EN ISO 12100:2012
–
“Safety of machinery
–
Basic concepts, general principles
for design
–
Risk assessment and risk reduction”.
PN-EN 60204-1:2010
–
“Safety of machinery
–
Electrical equipment of machines.
Part 1: General requirements”.
PN-EN ISO 13857:2010
–
“Safety of machinery
–
Safe distances to prevent hazard
zones being reached by upper and lower limbs”.
PN-EN 60079-0:2013/A11:2014E
–
“Electrical appliances in areas of gas explosion risk.
Part 0: General requirements”.
PN-EN 60079-7:2010
–
“Electrical appliances for explosive gas atmospheres.
Part 7: Increased safety “e”.
PN-EN 1127-1:2011P
–
“Explosive atmospheres. Explosion prevention and protection.
Basic terminology and methodology”.
PN-EN 13463-1:2010
–
“Non-electric appliances in areas of explosion risk
–
Part 1
–
Basic concepts and requirements”.
