Know your Iron
•
We recommend the use of distilled water.
•
Make sure that both the Steam Control turning Knob and
Temperature Control Dial are in “OFF” position.
•
Hold the iron upright so that the water-filling inlet is in a horizontal
position.
•
Fill with water through Water Filling Inlet until the water reach the
“MAX” mark indicated on the side of the iron, and never fill above
this mark.
Follow the ironing instructions on the garment label. If there is no
instruction but you do know the kind of fabric, please consult the
following table.
Note:
If the fabric consists of various kinds of fabrics, always select
the temperature required by the most delicate fabrics.
Fabric
Temperature control Temperature requirement
Silk
Low temperature
wool
Medium temperature
Cotton, linen
High temperature
•
Place the iron in a vertical position and set the temperature
control dial at the minimum/low heat setting.
•
Insert the plug into the socket, and then turn the temperature
control dial to the “high heat” marking. The pilot light will come
on, indicating that the iron is heating up.
Setting temperature
Steam ironing
A. Spray Nozzle
B.
Water filling inlet
C.
Steam control dial
D.
Burst of steam button
E.
Spray Button
F.
Temperature control dial
G. Up cover
H.
Power cord protector
I. Rear cover
J. Body
K. Skirt
L.
Self clean button
M. Water tank
N. Soleplate
Before first use
•
It is normal for small amount of smoke to be produced the first
time, this will quickly disappear.
•
When using the steam function for the first time, do not direct
the steam towards the laundry, as there could be debris from the
steam vents.
Filling with water
GB-4
GB-5
