KLING & FREITAG LINE 212-6 User Manual Download | Manualshive

Page: 8 / 37

background image

User's Manual

LINE 212-6 / LINE 212-9

KLING & FREITAG GMBH ©2003 - 2005

Version 5.0, 23.03.2006

Page 8 of 37

2.

Product Descriptions and Versions

2.1

LINE 212 - 6

Short description:

2+1-way, completely horn loaded full-range speaker system with bass reflex tuning.
Integrated passive crossover with patented 'FLC technology' corrects delay times and
phase. Operations via specific system controller or signal processor with system macros.
Components: two horn loaded 12" chassis and one 1.5" high frequency driver on a
rotatable 65° x 50° CD-horn.

Enclosure:

Trapezoidal birch plywood enclosure with highly resistable structured black (RAL 9005)
or grey (RAL 7016) paint, 4 ‘allsafe JUNGFALK’ flying points, 1 rear mounted ‘allsafe
JUNFALK’ flying track, 2 butterfly handles, locking profiles for transport cover, stacking
sliders and corresponding stacking grooves for stacking identical enclosures, ball proof
steel grille covered with exchangeable black acoustic foam.

Optional versions:

−

LINE 212-6 - ‘Outdoor Installation’ / ‘Outdoor Mobile’
Version for outdoor use under roofs.

−

Special finish in RAL colours

−

LINE 212-6 - SP:
Version with integrated power amplifier technology
'

SP' speakers are shipped with a separate user's manual!

2.2

LINE 212 - 9

Short description:

2+1-way, completely horn loaded full-range speaker system with bass reflex tuning.
Integrated passive crossover with patented 'FLC technology' corrects delay times and
phase. Operations via specific system controller or signal processor with system macros.
Components: two horn loaded 12" chassis and one 1.5" high frequency driver on a
rotatable 90° x 50° CD-horn.

Enclosure:

Trapezoidal birch plywood enclosure with highly resistable structured black (RAL 9005)
or grey (RAL 7016) paint, 4 ‘allsafe JUNGFALK’ flying points, 1 rear mounted ‘allsafe
JUNGFALK’ flying track, 2 butterfly handles, locking profiles for transport cover, stacking
sliders and corresponding stacking grooves for stacking identical enclosures, ball proof
steel grille covered with exchangeable black acoustic foam.

Optional versions:

−

LINE 212-9 - ‘Outdoor Installation’ / ‘Outdoor Mobile’
Version for outdoor use under roofs.

−

Special finish in RAL colours

−

LINE 212-9 - SP:
Version with integrated power amplifier technology
'

SP' speakers are shipped with a separate user's manual!

«
...
6
7
8
9
10
...
»

Summary of Contents for LINE 212-6






































Reviews:

No comments

Related manuals for LINE 212-6

AM2 - SCHEMATICS

Brand: Martin Audio Pages: 1

Brand: Eclipse TD Pages: 10

Brand: KEF Pages: 10

Brand: Panasonic Pages: 2

RXD15 - RADIO CASSETTE W/CD

Brand: Panasonic Pages: 8

Brand: Dali Pages: 10

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 2

Brand: Magmaweld Pages: 8

AZ8350 - Cd Radio Cass Recorder

Brand: Magnavox Pages: 18

Brand: Magmate Pages: 20

Brand: Parkside Pages: 94

Brand: Party Light & Sound Pages: 28

APPELLO A105NAX

Brand: E2S Pages: 10

Brand: Orion Welders Pages: 51

LA SPHERE - DATASHEET 2

Brand: CABASSE Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands