Multiplexer
2 Multiplexer Routing Modes
A8
KLIPPEL Analyzer System
Page 4 of 16
Multiplexer Routing Modes
SINGLE 1 OUT OF 8
LABELED “1 X 8”
OFF
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
BUS A
BUS B
•
Select one of 8 inputs that is
routed to the output.
•
(both output connectors are in
parallel)
•
Or give the input to one of the
8 outputs.
•
Can be controlled in Manual
mode and from Digital I/O,
•
USB, Direct Control.
DUAL PARALLEL 1 OUT
OF 4
LABELED “2 X 4”
OFF
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
BUS A
OFF
BUS B
•
Select one of input channel 1
to 4 that is given to output A.
•
Equivalent input channel 5 to 8
is given to output B
•
(1+ 5, 2 + 6, 3 + 7, 4 + 8).
•
Can be controlled in Manual
mode and from Digital I/O,
•
USB, Direct Control.
DUAL SEPARATE 1 OUT
OF 4
LABELED “4 + 4”
BUS B
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
BUS A
•
Select one of input channel 1
to 4 that is routed to output A
•
Select one of input channel 5
to 8 that is routed to output B
•
Can be controlled in Manual
mode and from Digital I/O,
•
USB, Direct Control
CUSTOM
BUS B
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
BUS A
•
Any combination of input and
output channels is possible,
e.g.
•
Parallel input A and B to out-
put channel 0, 1, 2, …8 or
•
Input A to 0 – 4 output chan-
nels
•
from channel 1, 2, 3, 4 and
•
Input B to 0 – 4 output chan-
nels
•
from channel 5, 6, 7, 8.
•
Can only be controlled from
USB or Direct Control inter-
face.