22
DD-5.1 Operation – Pro Logic Mode
Pro Logic Mode
power
balance
delay
prologic
field
EQ
on/off
EQ
setup
preset 1
preset 2
preset 3
mute
Your DD-5.1 will automatically switch to Pro logic
mode when it detects the Pro logic signal. With
other signal inputs, you can select the Dolby Pro
Logic mode by pressing
Prologic Button on the
remote. Repeatedly pressing the
Prologic Button
will circle the Pro Logic mode in an order of
“
AUTO,” “ALL PCM,” “ENABLE” AND “DISABLE.”
If Pro Logic signal is detected, DD-5.1 will switch to Pro Logic mode automatically, and the
display shows the following information:
D o l b y
D i g i
t a I
C o
P R O L O G I C
A U T O
If Stereo signal (either in analog or in digital form) is detected, DD-5.1 will switch to Stereo
mode automatically. You can then have the stereo signal converted to Pro Logic mode by
pressing the
Prologic Button until you see the display with following information:
D o l b y
D i g i
t a I
C o
P R O L O G I C
A L L
P C M
or
D o l b y
D i g i
t a I
C o
P R O L O G I C
E N A B L E
In case of converting Prologic or 2-channel Dolby Digital signal into Stereo mode, you can
press the
Prologic Button until you see the display with following information:
D o l b y
D i g i
t a I
C o
P R O L O G I C
D I S A B L E
