Operating manual 17.410+411
Pos.: 20
Dateiname
Firma
Datum
Rev
BK-DH 700 x 1000 eng.doc
BRUKS-KLÖCKNER
27.02.09
00
Seite 12 von
61
3.1.5 Counter knife carrier
The anvil carrier is positioned on top of the anvil carrier support, welded into the ma-
chine. The anvil carrier is held by plates and pressure bolts on each side of the hous-
ing. To change anvils, the carrier can be moved laterally by hydraulics. Anvil carrier
and support are provided with replaceable wear plates.
3.1.6 Rotor
Description of bearings see 3.1.1.
The rotor consists of the welded steel rotor, the knives and knife mounting device.
The standard knife mounting is by clamping plates with bolts, tapered wedge type
knife clamping is also available. The rotor is provided with replaceable wearplates
underneath the knives.
The rotor is mounted onto the shaft utilising tapered ring locking elements.
3.1.7 Hood
The hood covers the housing over the rotor and provides access for knife changes.
The hood pivot is a bushing type.
3.1.8 Screen
The screen is of welded steel construction, heavily re-inforced and mounted in guides
in the housing sideplates.
3.1.9 Feedroll carrier
The feedroll carrier is a solid welded steel fabrication, and carries the upper feedrolls.
The carrier is pivoting from the inlet of the machine, see 3.1.2.
3.1.10 Machine housing
The machine housing is a heavy welded steel construction and carries all
aforementioned components.
