EN - 13
3.3 Operating your Freezer
Lighting (If available)
When the product is plugged in for the
first time, the interior lights may turn on 1
minute late due to opening tests.
3.3.1 Freezer Temperature Set Button
This button allows setting temperature
of the freezer. In order to set values for
freezer partition, press this button. Use this
button also to activate super freeze mode.
3.3.2 Alarm symbol (Alarm LED)
In case of a problem within the freezer, the
alarm led will release red light.
3.3.3 Super Freezer Mode
When Would It Be Used?
•
To freeze huge quantities of food.
•
To freeze fast food.
•
To freeze food quickly.
•
To store seasonal food for a long time.
How To Use?
•
Press temperature set button until super
freezing light comes on.
• Super freezing led will light during this
mode.
• Maximum amount of fresh food (in
kilograms) to be frozen within 24 hours is
shown on the appliance label.
•
For optimal appliance performance
in maximum freezer capacity, set the
appliance to active super freeze mode 24
hours before you put the fresh food into
the freezer.
During This Mode:
If you press temperature set button, the
mode will be cancelled and the setting will
be restored from -16.
Super freeze mode will automatically
cancel after 30 hours, depending on
the environmental temperature or when the
freezer sensor reaches a sufficiently low
temperature.
3.3.4 Freezer Temperature Settings
•
The initial temperature of the setting
display is -18 °C.
•
Press freezer setting button once.
•
Every time you press the button, the
setting temperature will decrease.
(-16 °C, -18 °C, -20 °C,.. super freezing)
•
If you press freezer setting button until
super freezer symbol is displayed on
freezer.
•
Settings display and you do not press
any button within the following 3 seconds,
super freezing will blink.
• If you keep on pressing, it will restart from
last value.
Recommended Temperature Values for
Freezer
When to adjust
Inner
Temperature
For minimum freezing capacity
-16
o
C, -18
o
C
In normal usage
-18
o
C, -20
o
C,
-22
o
C
For maximum freezing capacity
-24
o
C
Note:
Some built-in appliances may have a
stand-by mode.
3.3.5 Stand-By Mode
How To Activate ?
Set “-16” set value and push set button until
all leds are blink three times.
How It Works?
In stand-by mode; all components will be
disabled. If user push set button while in
stand-by mode, all leds will blink three
times to show stand-by mode is active.
How To Deactivate ?
Push and hold set button until display
returns to normal working.After the mode
is deactivated, the “Alarm LED” may light
on the display because the product may be
hot. The “Alarm LED” will turn off when the
product reaches normal temperature.
Temperature Settings Warnings
•
Your appliance is designed to operate in
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
is not recommended that your fridge is
operated in the environments which are
outside of the stated temperature ranges.
