EN - 13
Simultaneous operation of and
buttons
The corresponding heater must be chosen
with the Activate/Deactivate Heater Button
, the Decimal Point of the related
Heater Display will then flash. To switch
off the heater,
and
must be pressed
simultaneously. A buzzer will sound and “
0
”
will appear in the heat setting display when
this is successful.
If the timer is active for the selected heater,
then “
0
” will appear in the heater and timer
displays, and the related Cooking Zone
Indicator and the Timer Function will both
switch off.
If there is any residual heat for the heater,
this will be indicated by a “
H
” in the heat
setting display.
Reduction of the heat setting to
“
0
”
by
operating button
The heater can also be switched off by
reducing the heat setting to “
0
”.This will
cause the associated Decimal Point of the
heater, the related Cooking Zone Indicator
and the Timer Display to all switch off, also.
If there is any residual heat for the heater,
this will be indicated by a
“
H
” in the heat
setting display.
Use of the timer switch-off function for
the corresponding heater (if available)
After counting down to zero, the timer will
stop, the corresponding Heater Display will
show “
0
” and the Timer Display will read
'
00
'. The corresponding Cooking Zone
Indicator will disappear.
An assigned Dual/Triple Zone Selection
Indicator will also disappear if it is active.
Additionally, the buzzer will sound when the
timer stops. Pressing any button will silence
the timer.
Key Lock
The key lock function is used to set ‘safe
mode’ on the appliance and can only be
used in Operating Mode (B-Mode). The lock
function becomes active when the key Lock
button is pressed for at least 2 seconds.
This operation is acknowledged by a buzzer
and the Key Lock Indicator will flash to
indicate the heater is locked.
If the heater is locked, it will only be
possible to switch the appliance off by
pressing
, all other buttons are blocked
and it will not be possible to make any
adjustments by pressing the buttons. If any
other button is pressed in the lock mode,
the buzzer will sound and the Key Lock
Indicator will flash.
Only the switch-off operation by pressing
is possible. However, if the appliance is
switched off, it can not be restarted again
without being unlocked.
Child Lock
The child lock function is used to lock the
appliance in a complicated, multi-step
process. Child lock (and unlocking) is only
available in the S-Mode.
First, must be pressed until the buzzer
sounds, then
and
must be pressed
simultaneously for at least 0.5 seconds,
but no longer than 1 second. Following
this, touch to activate the child lock.
All four heater displays will show “
L
” as
confirmation.
If the minute minder timer is still running,
it will proceed until “
00
” is reached and
the timer will beep. After confirmation of
timer completion, the appliance will be fully
locked. None of the buttons can be used as
long as the appliance is locked.
Child lock can be deactivated in the same
way that it is activated. After pressing
a beep is heard,
and
have to be
pressed simultaneously for at least 0.5
seconds, followed by pressing only. As
confirmation for successful unlocking, “
L
”
will no longer be displayed.
Touch Control Safety Functions
The following safety functions are available
to avoid unintended operations.
Sensor Safety Cut-Off
