Klutch 343901, Owner'S Manual

1

Thank you very much for choosing a Klutch

TM

product! For future reference, please complete

the owner's record below:

Model: _______________     Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire

manual to become familiar with this product before you begin using it. 
This machine is designed for certain applications only. The distributor cannot be responsible

for issues arising from modification. We strongly recommend this machine is not modified

and/or used for any application other than that for which it was designed. If you have any

questions relative to a particular application, do not use the machine until you have first

contacted the distributor to determine if it can or should be performed on the product.  
For technical questions please call 1-800-222-5381.

INTENDED USE

This Multi-Function Tool is intended for sawing, sanding, polishing and cutting.

TECHNICAL SPECIFICATIONS

Description

Specifications

Motor:                          120V ~ 60Hz, 2 Amps
No load speed:             1000 - 21000 RPM
Packed weight:              2.6 lbs

UNPACKING

When unpacking the tool, please check if any parts are missing or broken. Please call Product Support  at 1-

800-222-5381.

Description

Qty

Multifunction Tool  . . . . . . . .1

Allen key . . . . . . . . . . . . . . .1

Straight saw blade  . . . . . . .1

Bending shoval blade  . . . . .1

Half circular saw blade  . . . .1

Triangle sand disc  . . . . . . .1

Sanding paper  . . . . . . . . . .2

GENERAL SAFETY RULES

WARNING! Read and understand all instructions. 

Failure to follow all instructions listed below may result

in electric shock, fire and/or serious injury. 

WARNING! The warnings, cautions, and instructions discussed in this instruction manual cannot

cover all possible conditions or situations that could occur. It must be understood by the operator

that common sense and caution are factors which cannot be built into this product, but must be

supplied by the operator.