Sanding
• Always use undamaged sandpaper and change it often. This will not only give you better results but also
prolong the life of your tool.
• Do not use excessive force when sanding; apply a constant, light pressure. Applying too much pressure will
not speed up the sanding process; it will merely wear out the sandpaper and Multi-Function Tool more
quickly.
• Do not use sandpaper that you have previously used for sanding metal to sand wood.
Care and maintenance
• Always keep the motor’s ventilation openings free of dust and debris.
• Clean the machine regularly using a moist cloth. Avoid using strong detergents.
Troubleshooting guide
The tool does not
start.
The tool runs slowly.
No power.
Worn brushes.
Short circuit
Faulty power switch.
Worn/damaged accessory.
Speed too low.
The motor is overheated.
Check the power point
Contact us in case of motor or
electrical faults.
Sharpen or change the
accessory.
Do not press down too hard.
Heavy vibration.
Loose accessory.
Tighten the tool and make sure
it is set correctly.
Sparks in the motor
Brushes jammed.
Winding short circuited.
Dirt on commutator.
Contact distributor in case of
motor or electrical faults.
6
Summary of Contents for 343901
Page 9: ...8 ...
