Page 11 of 15
After Each Use
Clean up the scraps in the jaws after each forming.
Apply preventive oil on the jaw after each use.
Maintenance
Proper maintenance can help extend the life of this vise. It is recommended that the general condition
of any tool be examined before it is used. Keep your vise in good repair by adopting a program of
conscientious repair and maintenance in accordance with the recommended procedures found in this
manual.
Maintenance Interval
Maintenance Point
Between each use
Keep handles dry, clean, and free from oil and grease.
Trouble shooting
⚠
WARNING
•
Where gloves before examining this vise.
Failure
Possible Cause
Corrective Action
Vise is crushing
and marring
Over tightening, using
incorrect or dirty jaws
can damage the work
piece.
Before clamping anything in this vise, assure the
vise is clean and in working order.
If the work piece is softer than the jaws, use
shims or a softer material between the work
piece and the jaws to prevent damage to the work
piece.
