Page 4 of 15
Intended Use
The Klutch 4" Cross Slide Drill Press Vise has replaceable serrated 4in. jaws that open 3 in. wide.
Two swivel crank handles adjust both forward and sideways for versatile clamping and precise drilling
capabilities. Set screws hold positioning tightly for drilling. Longitudinal movement of 3 5/8 in. with
cross travel of 3 5/8 in. Vise is secured to drill press by 3 slots on 2 sides and 1 slot on one end.
Packaging Contents
•
Fully Assembled Main Body
•
Handles (2)
•
Fastener Nuts (2)
•
Owner’s Manual
Technical Specifications
Property
Specification
Jaw Capacity
3 in.
Jaw Length
4 in.
Material
Heavy-duty cast iron
Handles
2 (qty.)
Longitudinal Travel
3 5/8 in.
Important Safety Information
⚠
WARNING
•
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
•
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
•
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
•
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
•
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be a safer experience and do the job better at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
•
Industrial or commercial applications must follow OSHA requirements.
