background image

To avoid injury please read this manual carefully before operating this machine.

NEVER

attempt to mount the treadmill whilst the running belt is moving.

NEVER

step off the treadmill while the running belt is moving.

NEVER

operate the treadmill if it is damaged or is not working as it should be.

DO NOT

overexert yourself or work to exhaustion. If you feel any pain or abnormal symptoms, stop

your workout immediately and consult your doctor.

DO NOT

start the treadmill when it is in its folded position.

DO NOT

operate the treadmill in or around water / sources of heat & avoid placing the treadmill on

thick carpet.

DO NOT

place any objects on the running belt or the treadmill itself.

NEVER

connect a live power cable to the treadmill. Please turn off the power supply and the On/Off

switch on the back of this machine before connecting the power cable to the machine. Once safely

connected you can switch on the power supply followed by the on/off switch on the back of the

machine. Connecting a live cable directly into the back of the machine can damage the electrical

components.

Always allow the running belt to come to a complete stop before folding.

Always attempt to move the treadmill by using the wheels at the base of frame.

Periodically check all the parts for signs of wear or damage. If you find defective parts, stop use

immediately, make sure all the problems are solved prior to continuing to use.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

This treadmill is not intended to use by persons (including children) with reduced physical, sensory or

mental capabilities or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the treadmill by a person responsible for their safety.

If any of the adjustment devices are left projecting, they could interfere with the user’s movement.

Noise emission under load is higher than without load.

Children should be supervised to ensure that they do not play with the treadmill.

This machine is not suitable for children under 14 years of age.

Product is in compliance with EN20957-1 & 6 CLASS HC as well as AS/NZS 60335.1. Suitable for
domestic use only.

1. CAUTION

Summary of Contents for 42955436










Reviews: