5
6
MODE / UNIT TRANSFER
Note: The unit system of scale depends on scale destination or the requirement
of distributor.
Press
UNIT
button to switch the mode or unit you need after turning on the
scale, it can be switch cercularly.
There is
UNIT
button on base of the scale for some models, in this case, you
need to set the unit with the
UNIT
button on base.
Load weighing
object
VOLUME MEASURING
Pour milk
1. Place the scale on a solid and flat surface.
2. Press button to turn on.
3. Press the
UNIT
button to convert the mode to water or milk volume mode when
LED shows"0".
4. Put a container onto the scale platform, LED shows the weight of the container.
5. Press button for Zero or Tare.
6. Pour liquid (water or milk) into the container, LED shows the volume of the liquid.
To weigh different loads consecutively without removing loads from the scale.
Put first Load on the scale, get weight reading. Press button to reset the
LED reading to "0" before adding next load. You can repeat this operation.
Condition 1: "ZERO" function
When total sum of all loads on scale
≤4% of scale's max.weight capacity:
LED will show ----- or Og each time
is pressed. ----- means not stable, please
wait for a moment. Og and meanwhile an
icon o on the LED mean ZERO function
is activated. Max.weight capacity remains
unchanged.
Condition 2: "TARE" function
When total sum of all loads on scale
>4% of scale's max.weight capacity:
LED will show ----- or Og each time
is pressed. ----- means not stable, please
wait for a moment. Og and meanwhile an
icon T on the LED mean TARE function
is activated. Max.Weight capacity is reduced
by total weight of all loads.
Under this condition:
By pressing , you can see the total
weight of all loads on the scale. If you want
to weigh more loads, just press to reset
LED reading to '0' again.
(For example:
When capacity is 2000g, 4% is 80g;
When capacity is 5000g, 4% is 200g)
(For example:
When capacity is 2000g, 4% is 80g;
When capacity is 5000g, 4% is 200g)
ZERO & TARE FUNCTION
