6
In the Local Area Connection status, click
Properties
.
7
When the next dialog opens, choose
Internet Protocol Version 4
and then click
Properties
.
8
In the Properties dialog, select
Use the following IP address
and then enter a unique
IP address and subnet mask.
l
The IP address must be unique and be part of the same subnet as the translator’s
address.
l
If the translator is still configured with the default address, use 192.168.1.252.
l
Set the subnet mask to 255.255.0.0.
9
When finished, click
OK
to save the work and then close all dialog boxes.
To test the connection, open a browser window and enter the address of the translator.
When the log in page opens, set up the translator as described in the topic
Maintenance
The KMD-5551E translator requires no routine maintenance. If necessary, clean with a damp
cloth and mild soap.
If you encounter difficulty
If you experience difficulty with the KMD-5551E translator, KMC Controls provides the
following assistance.
The KMC Controls web site
Navigate to the support section on the KMC controls web site
for the latest information for KMD-5551E translator and other KMC Controls products.
KMC technical support
Our distribution partners have unlimited and free access to our team
of Technical Support representatives. We provide coast-to-coast and toll-free support from
8:00 AM Eastern to 5:00 PM Pacific time.
Toll-Free Technical Support: (866) 303-4562
KMD-5551E Translator
Section 1: Introduction
Revision B
13
