Handling
Functional units (digital)
All of this functional units are to be set directly in the hardware unit or using the
K.M.E. Control software. The names refer to the MENU PROMPT.
Input Channels
DSP- functions in the input channels
Delay
Channel [1 … 3]
Value
[0
–
2.000
ms]
Time-delay in the input and all output channels routed to this input channel
(Master – Delay).
Mute
Channel [1 … 3]
Value [Mute Off … Mute On]
Mute in the input and all output channels routed to this input channel (Master –
Mute).
Gain
Channel [1 … 3]
Value [-60 dB ... +10 dB]
Gain in the input and all output channels routed to this input channel (Master –
Gain). The output level pots are to be used independently!
Filters
Channel [1 … 3]
Filter
[1
...
5]
Type
[Filter
type
–
see
chapter
‚Filters’]
Frequency
[20
Hz
...
44
kHz]
Q
(bandwidth)
[0,1
…
20]
Gain
(boost/cut)
[-20
dB
…
+12
dB]
Equalizer of the Input and all output channels routed to this input (Master –
EQ). This EQ can be used as ‘main’ equalizer for the PA system . More
information to the filters is given in the chapter ‚Filters’!
Output Channels
DSP- functions in the output channels
Delay
Channel [1 … 6]
Value
[0
-
500
ms]
Time-delay in the output
Mute
Channel [1 … 6]
Value [Mute Off … Mute On]
Summary of Contents for DAP 26
