Page: 8/
28
2
）
Elongate the heat pipe and snap the flat end of the heat pipe joints into the elliptical hole
of the window sealing plate assembly (as shown in Figure 5 and Figure 6).
Notes: 1. the flat end of the heat pipe joints must be snapped into place.
2. The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep the
ventilation of the heat pipe unobstructed.
Figure
5
Figure 6
Important Notice
The length of the exhaust hose shall be
(
280~1,500mm
) 11-59 Inches
, and this length
is based on the specifications of the air conditioning. Do not use extension tubes or replace it
with other different hoses, or this may cause a malfunction. Exhaust must be unobstructed;
otherwise, it may cause overheating.
Summary of Contents for Easy Cool
Page 1: ...Page 1 28 Easy Cool PORTABLEAIR CONDITIONER Instruction Manual ...
Page 2: ......
Page 7: ...Page 6 28 2 Components ...
