Version 2018-11
Technical Data are subject to change without notice!
9
hose clamps
Caution:
Fix TEL1-PCM module with at least 10 layers of the special mounting tape around the shaft. Depending on the
shafts RPM and diameter particular attention needs to be paid to the safe mounting of the components.
The manufacturer doesn’t accept liability for damages, which results from insufficient attachment of the
individual components.
The tape is only for test purposes, in order to test the electrical function of the units in the idle state of the shaft.
During the rotation test appropriate safety precautions should be taken.
The entire installation may be used only by authorized persons. By using tape for the attachment, it has to be
used in the direction of rotation of the shaft and the end has to be secured. Only non-elastic tapes
(
Fiberglas
Tape)
with high tensile strength should be used for pre-fixing. Additionally, use hose clamps for final fixing!! The
individual components are to be distributed in such a way on the shaft that imbalances are avoided.
10 layers of the special mounting tape around the shaft.
We recommend aadditionally use of a
hose clamps
for
final fixing of the transmitter unit!!
Fix with 3 layers of mounting tape around the coil
and cables
