background image

7

Safety

The refrigerated island is glazed all 

around and is delivered fully assembled 

(ready to plug in). Apart from the correct 

alignment at the installation site, no final 

assembly by the user is required. 

 The person responsible on site 

(e.g. the store manager in the 

case of installation in a super

-

market) must ensure that the 

operators of the refrigerated 

island at the installation site are instruc

-

ted in the correct use of the operating 

instructions and are familiar with it. 

The refrigerated island meets all the 

requirements of EU Directive 2011/65EU 

(RoHS2) on the avoidance of hazardous 

substances in electrical and electronic 

equipment and EU Directive 1907/2006 

(REACH) on the registration, evaluation 

and approval of chemicals. The cooling 

system installed in the refrigerated island 

works with the refrigerant R290 (propane) 

and the insulating foam polystyrene. 

• 

The global warming potential (GWP) 

corresponds to the value 3 and the 

ozone depletion potential (ODP) to 

the value 0.

Technical data and filling 

quantities can be found on 

the type plate of the refrige

-

rated island, as well as on the 

product data sheet, which 

you can obtain from KMW customer 

service.

Only use the cooling island as described 

in this user manual. Any other use is con

-

sidered improper and can lead to pro

-

perty damage or even personal injury.

The refrigerated island is not a child‘s toy. 

The manufacturer assumes no liability for 

any injury, loss or damage resulting from 

improper or incorrect use. Possible exam

-

ples of improper or incorrect use are:

• 

Use of the refrigerated island for pur

-

poses other than those for which it is 

intended

• 

Non-observance of the safety inst

-

ructions and warnings, as well as the 

assembly, operation, maintenance 

and cleaning instructions contained 

in this operating manual

• 

Non-observance of any accident 

prevention regulations specific to the 

use of the refrigerated island and/or 

generally applicable

• 

Use of accessories and spare parts 

that are not intended for the cooling 

island

•  Changes to the cooling island
• 

Repair of the refrigerated island by 

someone other than the manufactu

-

rer or a specialist

• 

Operation or maintenance of the 

refrigerated island by persons who 

are unfamiliar with the handling of 

the refrigerated island and/or do not 

understand the hazards involved.

Summary of Contents for KIM 108 Series





















Reviews: