23
Changing the heat/cool element
AZURA® CT 2.1 Service Instructions VSM-020
7.3 Disassembling the heat/cool element
Note:
The components might be sharp-edged. Always wear gloves in
order to prevent injuries.
Torx screwdriver T20 (length 150 mm or longer)
Hexagon screwdriver, 8 mm
Process
Figure
1.
Open the door of the de-
vice and remove the tem-
perature sensor
1
from the
column fixure
2
. Lay the
temperature sensor on the
bottom of the device.
Fig. 30:
Remove temperature
sensor
2.
Loosen the 4 screws
3
of
the fan plate with the torx
screwdriver.
3.
Tilt the fan plate to one side
in order to remove it
4
.
Fig. 31:
Removing fan plate
Tools
2
1
3
4
