33
Replacing the leak sensor
AZURA® CT 2.1 Service Instructions VSM-020
Process
Figure
1.
Loosen the 6 Torx screws and
remove the rear panel of the
device.
Fig. 48
Loosen the screws
2.
Remove the plug-in
connector for the leak sensor
1
.
Fig. 49:
Remove the plug-in
connector of the sensor
3.
Loosen 3 cable ties which
bundle the cables. Ensure not
to damage other cables.
4.
Loosen the cable support
2
as well and put it to the
side for later use.
5.
Remove the leak sensor.
Fig. 50
Loosen the cable ties and
the cable support
The leak sensor has been removed.
Install new leak sensor.
1
2
Result
Next step
