43
7. Operation
7.6 Changing the finned brushes of the polishing unit
Navigate from the “F8 Settings” (3-7/35) main
menu, through “F8 Manual Functions” (8-1/18)
and “F4 Polishing Unit” (8-6/9), to the manual
functions of the “Polishing Unit”. Swivel the
polishing unit forward with the “Forward” (7-
14/1) touch panel button.
ATTENTION
Set the “Setting Mode” key switch (3-6/9)
to Position “1” (1 h.) so that the polish-
ing unit remains in front when the safety
doors open.
Open the protective hood and insert the bar (7-
15/1) in the hole in the clamping flange behind
the finned brush.
Insert the tap wrench (7-15/2) in the holes of the
clamping flange and unscrew in clockwise direc-
tion.
Exchange the finned brush and screw back the
clamping flange in counter-clockwise direction.
Figure 7-14
Manual functions “Polishing Unit”
1
Figure 7-15
Changing the finned brushes of
the polishing unit
1
2
