Brake and Parking Brake Operation
Your KneeRover® knee walker comes equipped with a Brake Lock/Parking Brake.
To engage the brake, squeeze the brake lever on the handle bar. To apply the
parking brake, squeeze brake handle firmly and while squeezing the brake
handle press the silver button to engage the lock (Top Right). While still holding
the button down, release the brake handle and your parking brake will be set.
To release the lock, squeeze the brake handle again and the silver button will
pop up.
Parking Brake
Unlocked
Parking Brake Locked
Step 5: Insert Handle Bar into the steering column and set at the
proper height
Please make sure the brake line is not twisted and the brake handle is facing
forward. Insert the Handle Bar into the steering column (Left). Raise the
handle bar to a comfortable position and insert the height adjustment knob
into the hole and tighten (Right). We recommend the handle bar height to be
set approximately waist high.
