background image

WARNINGS:

BEFORE OPERATING KNEE WALKER:

DO NOT exceed the maximum weight capacity of 300 pounds for 

this knee walker.  Exceeding the maximum weight capacity may 

result in injury to the user or damage to the knee walker.

After fully assembling the knee walker according to this user 

manual, ensure that the brakes are working correctly, meaning 

they engage the rear wheel(s) when the brake handle is squeezed.  

Failure to do this may result in injury to the user.

Inspect the knee walker periodically to ensure the brakes and 

wheels are functioning properly.  Be sure steering column clamp 

and height adjustment knob are tightened and fully engaged be

-

fore each use.  Also, ensure that the knee platform height adjust

-

ment clamp is tightened and fully engaged and the locking pin is 

locked in place prior to use.  

Only use accessories and replacement parts authorized by the 

KneeRover® brand.  Accessories designed by other manufacturers 

have not been tested by KneeRover® and are not recommended 

for use with KneeRover® products.

As a reminder, this is a mobility  / walking aid, not a recreational 

device.  For the user’s safety, it is important to follow these safety 

instructions at all times.

Summary of Contents for Knee Scooter

















Reviews: