11
ProLine P224xx P1
Eingang
0 (4) … 20 mA / max. 30,5 V
Fehlersignal bis 23 mA (NAMUR NE 43)
Ansprechstrom
ca. 30 μA (P22412P1: ca. 40 µA)
Spannungsabfall
ca. 2,9 V bei 20 mA (P22412P1: ca. 5,8 V bei 20 mA)
Überlastbarkeit
30 mA, 31 V, max. 1 Minute (Begrenzung mit Z-Diode)
Schutz gegen Verpolung durch PTC-Element,
Erholzeit ca. 1 min.
Ausgang
0 (4) … 20 mA / max. 27,5 V (1375 Ω Bürde bei 20 mA)
P22412P1: 2 x 0(4) … 20 mA / max. 24 V in Summe für beide
Ausgänge
Überlastbarkeit
30 mA, 30 V, max. 1 Minute (Begrenzung mit Z-Diode)
Schutz gegen Verpolung durch PTC-Element,
Erholzeit ca. 1 min.
Restwelligkeit
< 10 mVeff bei 500 Ω Bürde
Übertragungsverhalten
Übertragungsfehler
< 0,08 % v. E.
Bürdenfehler
< 0,015 % v.M. / 100 Ω Bürde
Sprungantwort (10-90 %)
ca. 5 ms bei 500 Ω Bürde
Temperatureinfluss
1)
TK < 8 ppm/K v.M. je 100 Ω Bürde (Referenztemp. 23 °C)
Übertragungsverhalten Speisetrennerbetrieb
Übertragungsfehler
< 0,08 % v. E.
Zusatzfehler
< 0,08 % v. E. / 10 V Eingangsspannung
Temperatureinfluss
1)
TK < 40 ppm/K v.M. / 10 V Eingangsspannung (Referenztemp. 23 °C)
Isolation
Prüfspannung
Eingang gegen Ausgang: 5,4 kV AC, 50 Hz
Kanäle untereinander: 3,6 kV AC, 50 Hz
Arbeitsspannung (Schutz gegen
gefährliche Körperströme)
Bis 600 V AC/DC, sichere Trennung nach EN 61140 durch verstärkte
Isolierung gemäß EN 61010-1: 2010 bei Überspannungskategorie III
und Verschmutzungsgrad 2
Bis 600 V AC/DC, sichere Trennung nach EN 61140 durch verstärkte
Isolierung gemäß EN 61010-1: 2010 bei Überspannungskategorie II
und Verschmutzungsgrad 2 zwischen den Kanälen
Bei Anwendungen mit hohen Arbeitsspannungen ist auf genügend
Abstand bzw. Isolation zu Nebengeräten und auf Berührungsschutz
zu achten.
EMV
Produktfamiliennorm EN 61326-1
Störaussendung: Klasse B
Störfestigkeit: Industriebereich
Technische Daten
Summary of Contents for ProLine P224 P1 Series
