25
ProLine P224xx P1
Input
0(4) … 20 mA / max. 30.5 V
error signal up to 23 mA (NAMUR NE 43)
Min. operating current
Approx. 30 μA (P22412P1: approx. 40 µA)
Voltage drop
Approx. 2.9 V at 20 mA (P22412P1: approx. 5.8 V at 20 mA)
Overload capacity
30 mA, 31 V, max. 1 minute (limited by Z-diode)
Reverse polarity protection by PTC element,
recovery time approx. 1 min.
Output
0(4) … 20 mA / max. 27.5 V (1375 Ω load at 20 mA)
P22412P1: 2 x 0(4) … 20 mA / total of max. 24 V for both outputs
Overload capacity
30 mA, 30 V, max. 1 minute (limited by Z-diode)
Reverse polarity protection by PTC element,
recovery time approx. 1 min.
Residual ripple
< 10 mVrms (at 500 Ω load)
Transmission behavior
Transmission error
< 0.08 % full scale
Load error
< 0.015 % meas.val. / 100 Ω load
Step response (10-90%)
Approx. 5 ms at 500 Ω load
Temperature influence
1)
Tc < 8 ppm/K meas. val. per 100 Ω load (reference temp. 23 °C)
Transmission behavior for operation as repeater power supply
Transmission error
< 0.08 % full scale
Additional error
< 0.08 % full scale / 10 V input voltage
Temperature influence
1)
Tc < 40 ppm/K meas. val. / 10 V input voltage (reference temp. 23 °C)
Isolation
Test voltage
Input against output: 5.4 kV AC, 50 Hz
Channels against one another: 3.6 kV AC, 50 Hz
Working voltage (protection
against electric shock)
Up to 600 V AC/DC, protective separation according to EN 61140 by
reinforced insulation according to EN 61010-1: 2010 with overvoltage
category III and pollution degree 2
Up to 600 V AC/DC, protective separation according to EN 61140 by
reinforced insulation according to EN 61010-1: 2010 with overvoltage
category II and pollution degree 2 across the channels
For applications with high working voltages, take measures to
prevent accidental contact and make sure that there is sufficient
distance or insulation between adjacent devices.
EMC
Product standard EN 61326-1
Emitted interference: Class B
Immunity to interference: Industry
Specifications
Summary of Contents for ProLine P224 P1 Series
